Chemistry Rotary-Vane Pumping Unit

Description

Zoom

 

Vacuum Pumping Units PC 3 with Rotary-Vane Pump and Cold Trap

Application

The VACUUBRAND pumping units PC 3 are designed for the fine vacuum range and especially for use in chemical laboratories. Due to the cold trap, the pumping unit handles even large amounts of condensable vapours.

Advantages

  • High-performance two-stage rotay vane pump
  • High-capacity glass cold trap  
  • compact, ready for operation

Ready-to-connect fine vacuum pumping units based on the two-stage rotary-vane pumps RZ 2.5, RZ 6, RZ 9 or RZ 16 (all with gas ballast and oil mist filter) with valve (type VS 16 or VS 25) and measuring port (small flange NW 16).
Assembled with large-volume cold trap GFK 1000i, mirrored for extended coolant life, and with implosion protection.
All components are mounted on a base plate with handles.

Technical data

 

Type

Ultimate vacuum
(partial)
without gas ballast

 Pumping speed
max. / m3/ h		 Technical
data		 Comments
mbar 50 Hz 60 Hz
PC 3 with RZ 2.5 4 x 10-4 2.3 2.8
PC 3 with RZ 6 4 x 10-4 5.7 6.8
PC 3 with RZ 9 4 x 10-4 8.9 10.2
PC 3 with RZ 16 4 x 10-4 16.6 19.1
For further technical data see Rotary Vane Pumps

Order data

 

Pumpstand PC 3, mounted with VACUUBRAND rotary-vane pump
(230 V ~ 50-60 Hz, plug CEE)		 Cat. No.
PC 3 with RZ 2.5 2.3 / 2.8 m3/ h 4 x 10-4 mbar 69 98 90
PC 3 with RZ 6 5.7 / 6.8 m3/ h 4 x 10-4 mbar 69 98 93
PC 3 with RZ 9 8.9 / 10.2 m3/ h 4 x 10-4 mbar 69 98 95
PC 3 with RZ 16 16.6 / 19.1 m3/ h 4 x 10-4  mbar 69 98 97
Accessories:
Air admittance valve VB 10 66 68 00
Small flange NW 25/interchangeable male ground joint NS 29/32 66 27 05
Small flange NW 40/interchangeable male ground joint NS 29/32 66 27 06
Pirani Vacuum Gauge VAP 5 Set 68 28 58