Chemistry-HYBRID pumping unit PC 3 / RC 6

Chemistry-HYBRID pumping unit PC 3 / RC 6
Interested? - Send your inquiry now! productInquiryCatcherAlt
PC 3 / RC 6
Note: Your request will be forwarded immediately to our partner next to you

PC 3 / RC 6

VACUUBRAND2613307ca. 618 mmca. 495 mmca. 32.2 kg

The RC 6 chemistry-HYBRID pump is a combination of a two-stage rotary vane pump and a two-stage chemistry diaphragm pump for optimized corrosion resistance. The diaphragm pump maintains the oil reservoir under vacuum in order to keep the partial pressures of solvent vapors at levels below their condensation points and to reduce largely the concentration of oxygen and corrosive gases. Therefore the RC 6 chemistry-HYBRID pump has a much higher solvent vapor pumping capability and resistance to aggressive gases than conventional rotary vane pumps. As version PC 3 with RC 6 - for larger amounts of vapors - an upstream connected cold trap condenses and collects the vapors.

Performance features

  • reduced internal corrosion, even when working with corrosive vapors
  • oil changes typically reduced 90% or more compared with rotary vane pumps alone
  • economical solution
  • pumping unit PC 3 / RC 6 with cold trap at the inlet for large amounts of vapors
  • ease of maintenance due to telescopic design

Technical data

Unit Converter productInquiryCatcherAlt
Technical dataUnit PC 3 / RC 6
Number of stages2 + 2
Max. pumping speed at 50/60 Hzm3/h5.9 / 6.9
Max. pumping speed at 50/60 Hzcfm3.5 / 4.1
Ultimate partial vacuum (abs.)mbar4 x 10-4
Ultimate vacuum (abs.)mbar/torr2 x 10-3 / 1.5 x 10-3
Ultim. vac. (abs.) with gas ballastmbar/torr1 x 10-2 / 0.75 x 10-2
Water vapor tolerance with gas ballastmbar>> 40 mbar
Ambient temperature range (operation)°C12 - 40
Ambient temperature range (storage)°C-10 - 60
Oil capacity (B-Oil) min./max.l0.34 / 0.53
Max. back pressure (abs.)bar1.1
Inlet connectionNS 29/32 female ground joint
Outlet connectionHose nozzle DN 8-10 mm
Rated motor powerkW0.37
Rated motor speed at 50/60 Hzmin-11500/1800
Degree of protectionIP 40
Dimensions (L x W x H)mm507 x 495 x 618
Weightkg32.2
Noise level at 50 Hz, typ.dBA50
Items suppliedPumping unit with chemistry-HYBRID-pump RC 6, cold trap, T-piece (with measuring port KF DN 10) and vacuum valve VS 16 completely mounted, ready for use after oil filling (bottle 0.5 l enclosed), with manual.
AccessoriesPTFE tubing KF DN 16 (1000 mm: 686031)
Stainless steel tubing KF DN 16 (1000 mm: 673336)
KF DN 25 with male ground joint NS 29/32 (662705)
Filter element oil mist filter RC (640187)
Paket Feinvakuumregelung KF DN 16 (683201)
Rubber vacuum tubing DN 8 mm (686001)

PC 3 / RC 6 - Pumping speed graph at 50 Hz

PC 3 / RC 6 - Pumping speed graph at 50 Hz

PC 3 / RC 6 - Pump down graph at 50 Hz (10 l volume)

PC 3 / RC 6 - Pump down graph at 50 Hz
(10 l volume)

PC 3 / RC 6 - Pumping speed graph at 60 Hz

PC 3 / RC 6 - Pumping speed graph at 60 Hz

PC 3 / RC 6 - Pump down graph at 60 Hz (10 l volume)

PC 3 / RC 6 - Pump down graph at 60 Hz
(10 l volume)

PC 3 / RC 6 - Dimension sheet

PC 3 / RC 6 - Dimension sheet

-Technical data are subject to change without notice-

Ordering data

Product nameMains voltage and frequencyPlugOrder no.
PC 3 / RC 6 230 V~ 50-60 Hz
IEC plug EN 60320 2613307

Product comparison

1111211111111
  1111        

Chemistry-HYBRID pump
RC 6

Chemistry-HYBRID pump RC 6
-2 x 10-3 1 x 10-2 5.9 6.9 -----

Chemistry-HYBRID pumping unit
PC 3 / RC 6

Chemistry-HYBRID pumping unit PC 3 / RC 6
RC 62 x 10-3 1 x 10-2 5.9 6.9 ---

Chemistry pumping unit
PC 8 / RC 6

Chemistry pumping unit PC 8 / RC 6
RC 62 x 10-3 1 x 10-2 5.9 6.9 ----