MV 10C NT

 MV 10C NT
Interested? - Send your inquiry now! Interested? Send your inquiry now!
MV 10C NT
Note: Your request will be forwarded immediately to our partner next to you

MV 10C NT

VACUUBRAND744300ca. 359 mmca. 260 mmca. 28.1 kg

Four-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0.9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. Upgraded with an exhaust waste vapor condenser (EK) the MV 10C NT +EK provides an excellent, environmentally friendly system with efficient solvent recovery. A separator for the inlet (AK) made of glass (with protective coating) against particles and liquid droplets is available as an optional accessory.

Performance features

  • outstanding chemical resistance and superior vapor tolerance
  • reduced process time due to very high flow rates even close to ultimate vacuum
  • very low vibration and quiet
  • excellent ultimate vacuum even with gas ballast
  • excellent environmental friendliness due to efficient solvent recovery (on models with EK accessory)

Technical data

Unit Converter Interested? Send your inquiry now!
Technical dataUnit MV 10C NT
Number of heads / stages8 / 4
Max. pumping speed at 50/60 Hzm3/h9.5 / 10.7
Max. pumping speed at 50/60 Hzcfm5.6 / 6.3
Ultimate vacuum (abs.)mbar/torr0.9 / 0.68
Ultim. vac. (abs.) with gas ballastmbar/torr1.5 / 1.1
Ambient temperature range (operation)°C10 - 40
Ambient temperature range (storage)°C-10 - 60
Max. back pressure (abs.)bar1.1
Inlet connectionSmall flange KF DN 25
Outlet connectionHose nozzle DN 15 mm
Rated motor powerkW0.44
Rated motor speed at 50/60 Hzmin-11500/1800
Degree of protectionIP 40
Dimensions (L x W x H)mm533 x 260 x 359
Weightkg28.1
Noise level at 50 Hz, typ.dBA52
ATEX conformity (only 230V)II 3G IIC T3 X Internal Atm. only
Items suppliedPump completely mounted, ready for use, with manual.
AccessoriesPTFE tubing KF DN 25 (1000 mm: 686033)
Inlet separator KF DN 25 (699979)
Centering and sealing ring KF DN 25 C Al/FEP (635722)
Emission condenser kit for eight cyl. NT pump models (699948)

MV 10C NT - Pumping speed graph at 50 Hz

MV 10C NT - Pumping speed graph at 50 Hz

MV 10C NT - Pump down graph at 50 Hz (100 l volume)

MV 10C NT - Pump down graph at 50 Hz
(100 l volume)

MV 10C NT - Pumping speed graph at 60 Hz

MV 10C NT - Pumping speed graph at 60 Hz

MV 10C NT - Pump down graph at 60 Hz (100 l volume)

MV 10C NT - Pump down graph at 60 Hz
(100 l volume)

MV 10C NT - Dimension sheet

MV 10C NT - Dimension sheet

-Technical data are subject to change without notice-

Ordering data

Product nameMains voltage and frequencyPlugOrder no.
MV 10C NT 230 V~ 50-60 Hz
CEE 744300
230 V~ 50-60 Hz
UK, IN 744302
100-115 V~ 50-60 Hz
120 V~ 60 Hz
US 744303

Product comparison

1111211111111111
  1111           

VARIO® chemistry pumping unit
PC 3003 VARIO

VARIO® chemistry pumping unit PC 3003 VARIO
MV 2C NT VARIO 0.6 1.5 2.8 2.8-----

MV 10C NT

MV 10C NT
-0.9 1.5 9.5 10.7 ---------

Chemistry vacuum system
MV 10C NT +EK

Chemistry vacuum system MV 10C NT +EK
MV 10C NT 0.9 1.5 9.5 10.7 --------

VARIO® chemistry pumping unit
MV 10C NT
VARIO

VARIO® chemistry pumping unit MV 10C NT VARIO
-0.6 1.2 12.8 12.8-------

VARIO® chemistry pumping unit
PC 3010 NT
VARIO

VARIO® chemistry pumping unit PC 3010 NT VARIO
MV 10C NT VARIO 0.6 1.2 12.8 12.8-----