Vacuum controller for lab scaffold CVC 3000 detect

For this product a successor is launchedSuccessor...
Interested? - Send your inquiry now!
CVC 3000 detect stand version

CVC 3000 detect

VACUUBRAND22614120ca. 114 mmca. 124 mmca. 1 kg

The CVC 3000 detect is a ready to use two-set-point vacuum controller. It consists of the vacuum controller CVC 3000 with integrated ceramic vacuum sensor and vent valve that forms together with a non-return valve and the chemically resistant solenoid valve a very compact and easy to install unit for vacuum control. The CVC 3000 detect is available both as bench-top device and as a unit designed for attaching to a lab scaffold. For available vacuum sources such as oil-free vacuum pumps that you already own and efficient vacuum network supplies, the electronic control increases the process efficiency and decisively elevates the solvent recovery. The environment is protected, service intervals of the vacuum pump are extended and efficiency is improved. With its adjustable sensitivity the boiling point recognition "detect" does approach and detect independently the boiling pressure and therewith facilitates the work with solvent evaporations. Due to the programmability also complex applications can be ran automatically and reproducible. The operating concept with its clearly arranged graphical display with clear text menus and jog wheel control is particularly beneficial.

Performance features

  • detect function for independent vapor pressure detection - time saving for other tasks
  • compact unit with chemically resistant vacuum valve and common laboratory hose connections - immediately ready for use
  • the vacuum measuring is integrated within the valve block - direct connection of the CVC 3000 detect between pump and vacuum application
  • integrated venting valve - simple pressure balance or ventilation with inert gas at the end of the process
  • non-return valve - no interference of parallel applications at a common vacuum source


Technical data

Unit Converter
Technical dataUnit CVC 3000 detect
Vacuum sensorIntegr.
Upper measuring limitmbar/torr1080 / 810
Lower measuring limitmbar/torr0.1 / 0.1
Measurement principleCeramic diaphragm (alumina), capacitive, gas indep., absolute pressure
Accuracy of measurement< +- 1 mbar/hPa/torr / +- 1 digit (after adjustment, constant temp.)
Temperature coefficient< 0.07 mbar/hPa/0.05 torr /K
Venting valve, connectionIntegrated, hose nozzle DN 4-5 mm
Ambient temperature range (operation)°C10 - 40
Ambient temperature range (storage)°C-10 - 60
Max. media temp. for continuous operation / short times°C40 / 80
Material of outer housingRobust plastic housing with good chemical resistance
Degree of protectionIP 20
Degree of protection of front side (also built-in version)IP 42
Max. power for VACUU·BUS® (24V DC)4 A
Cable length of external power supplym2
InterfaceRS 232C
Dimensions (L x W x H)mm124 x 124 x 114
NRTL certificationCanada and the USA
ATEX-approvalII 3/- G IIC T3 X Internal Atm. only
Items suppliedVacuum controller CVC 3000 detect for lab scaffold, complete with vacuum solenoid valve, non-return valve, integrated ceramic diaphragm vacuum sensor and venting valve. With mounting bracket for lab scaffold, power supply, ready to use, with manual
AccessoriesRubber vacuum tubing DN 6 mm (20686000)
Rubber vacuum tubing DN 8 mm (20686001)
DAkkS calibration with first delivery (20900216)
DAkkS recalibration (20900217)
VACUU·BUS® accessories

CVC 3000 detect - Dimension sheet

CVC 3000 detect - Dimension sheet

-Technical data are subject to change without notice-

Ordering data

Product nameMains voltage and frequencyPlug* Order no.
CVC 3000 detect 100-230 V~ 50-60 Hz
CEE/CH/UK/US/AUS/CN 22614120

* As part of the implementation process of our new ERP system in 2018 our catalog numbers were extended to 8 digits in length by adding the digits “2” or “20” to the beginning of the old catalog numbers.

This website uses cookies. By using this website, you agree to the use of cookies as outlined in our privacy statement. Learn more