Vacuum controller bench-top device CVC 3000 detect

For this product a successor is launchedSuccessor...


VACUUBRAND22614860ca. 174 mmca. 162 mmca. 1.5 kg22614860

The CVC 3000 detect is a ready to use two-set-point vacuum controller - available both as bench-top device and as a unit designed for attaching to a lab scaffold. It consists of the vacuum controller CVC 3000 with integrated ceramic vacuum sensor and venting valve that forms together with a non-return valve and the chemically resistant solenoid valve a very compact and easy to install unit for vacuum control. The electronic vacuum control increases the process efficiency and decisively improves the solvent recovery for existing vacuum sources like oil-free vacuum pumps or vacuum networks. In the “detect” mode the controller does approach and detect the boiling pressure and switches to the two-point vacuum control mode by itself. Manual settings are possible at any time during current operation.

Performance features

  • detect function for independent vapor pressure detection - time saving for other tasks
  • compact unit with chemically resistant vacuum valve and common laboratory hose connections - immediately ready for use
  • the vacuum measuring is integrated within the valve block - direct connection of the CVC 3000 detect between pump and vacuum application
  • integrated venting valve - simple pressure balance or ventilation with inert gas at the end of the process
  • non-return valve - no interference of parallel applications at a common vacuum source


Technical data may deviate. Precise information on your product and other language versions of the operating manual are available on request.

go to top

Technical data

Unit Converter
Technical dataUnit CVC 3000 detect
Vacuum sensorIntegr.
Upper measuring limitmbar/torr1080 / 810
Lower measuring limitmbar/torr0.1 / 0.1
Measurement principleCeramic diaphragm (alumina), capacitive, gas indep., absolute pressure
Accuracy of measurement< +- 1 mbar/hPa/torr / +- 1 digit (after adjustment, constant temp.)
Temperature coefficient< 0.07 mbar/hPa/0.05 torr /K
Venting valve, connectionIntegrated, hose nozzle DN 4-5 mm
Ambient temperature range (operation)°C10 - 40
Ambient temperature range (storage)°C-10 - 60
Max. media temp. for continuous operation / short times°C40 / 80
Material of outer housingRobust plastic housing with good chemical resistance
Protection classIP 20
Protection class of front side (also built-in version)IP 42
Max. power for VACUU·BUS® (24V DC)4 A
Cable length of external power supplym2
InterfaceRS 232C
Dimensions (L x W x H)mm181 x 162 x 174
NRTL certificationCanada and the USA
ATEX-approvalII 3/- G Ex h IIC T3 Gc X Internal Atm. only
Items suppliedVacuum controller CVC 3000 detect bench-top device, complete with vacuum solenoid valve, non-return valve, integrated ceramic diaphragm vacuum sensor and venting valve. With power supply, ready to use, with manual
AccessoriesDAkkS calibration with first delivery (20900214)
DAkkS recalibration (20900215)
VACUU·BUS® accessories
Rubber vacuum tubing DN 6 mm (20686000)
Rubber vacuum tubing DN 8 mm (20686001)

CVC 3000 detect - Dimension sheet

CVC 3000 detect - Dimension sheet

-Technical data are subject to change without notice-

Ordering data

Product nameMains voltage and frequencyPlugOrder no.
CVC 3000 detect 100-230 V~ 50-60 Hz
CEE/CH/UK/US/AUS/CN 22614860
go to top
go to top
Free inquiry
CVC 3000 detect desktop version

By submitting the contact form, you agree to the processing of your data for the purpose of answering your request. Further information and information on revocation and objection can be found in our privacy statement. Field marked with * are mandatory.