Химическая насосная станция HYBRID PC 3 / RC 6

Description

VACUUBRAND22613307ca. 618 mmca. 495 mmca. 32.2 kg22613307

The RC 6 chemistry-HYBRID pump is a combination of a two-stage rotary vane pump and a two-stage chemistry diaphragm pump for optimized corrosion resistance. The diaphragm pump maintains the oil reservoir under vacuum in order to keep the partial pressures of solvent vapors at levels below their condensation points and to reduce largely the concentration of oxygen and corrosive gases. Therefore the RC 6 chemistry-HYBRID pump has a much higher solvent vapor pumping capability and resistance to aggressive gases than conventional rotary vane pumps. As version PC 3 with RC 6 - for larger amounts of vapors - an upstream connected cold trap condenses and collects the vapors.

Performance features

  • reduced internal corrosion, even when working with corrosive vapors
  • oil changes typically reduced 90% or more compared with rotary vane pumps alone
  • economical solution
  • pumping unit PC 3 / RC 6 with cold trap at the inlet for large amounts of vapors
  • ease of maintenance due to telescopic design

Downloads

go to top

Technical data

Конвертор величин
Technical dataUnit PC 3 / RC 6
Number of stages2 + 2
Max. pumping speed at 50/60 Hzm3/h5.9 / 6.9
Max. pumping speed at 50/60 Hzcfm3.5 / 4.1
Ultimate partial vacuum (abs.)mbar4 x 10-4
Ultimate vacuum (abs.)mbar/torr2 x 10-3 / 1.5 x 10-3
Ultim. vac. (abs.) with gas ballastmbar/torr1 x 10-2 / 0.75 x 10-2
Water vapor tolerance with gas ballastmbar>> 40 mbar
Ambient temperature range (operation)°C12 - 40
Ambient temperature range (storage)°C-10 - 60
Oil capacity (B-Oil) min./max.l0.34 / 0.53
Max. back pressure (abs.)bar1.1
Inlet connectionNS 29/32 female ground joint
Outlet connectionHose nozzle DN 8-10 mm
Rated motor powerkW0.37
Rated motor speed at 50/60 Hzmin-11500/1800
Degree of protectionIP 40
Dimensions (L x W x H)mm507 x 495 x 618
Weightkg32.2
Noise level at 50 Hz, typ.dBA50
Items suppliedPumping unit with chemistry-HYBRID-pump RC 6, cold trap, T-piece (with measuring port KF DN 10) and vacuum valve VS 16 completely mounted, ready for use after oil filling (bottle 0.5 l enclosed), with manual.
AccessoriesPTFE tubing KF DN 16 (1000 mm: 20686031)
Stainless steel tubing KF DN 16 (1000 mm: 20673336)
KF DN 25 with male ground joint NS 29/32 (20662705)
Filter element oil mist filter RC (20640187)
Package fine vacuum control KF DN 16 (20700100 or 20700101)
Rubber vacuum tubing DN 8 mm (20686001)

PC 3 / RC 6 - Pumping speed graph at 50 Hz

PC 3 / RC 6 - Pumping speed graph at 50 Hz

PC 3 / RC 6 - Pump down graph at 50 Hz (10 l volume)

PC 3 / RC 6 - Pump down graph at 50 Hz
(10 l volume)

PC 3 / RC 6 - Pumping speed graph at 60 Hz

PC 3 / RC 6 - Pumping speed graph at 60 Hz

PC 3 / RC 6 - Pump down graph at 60 Hz (10 l volume)

PC 3 / RC 6 - Pump down graph at 60 Hz
(10 l volume)

PC 3 / RC 6 - Dimension sheet

PC 3 / RC 6 - Dimension sheet

-Technical data are subject to change without notice-

Ordering data

Product nameMains voltage and frequencyPlug* Order no.
PC 3 / RC 6 230 V~ 50-60 Hz
IEC plug EN 60320 22613307

* Пожалуйста обратите внимание на изменение номеров для заказа. В связи с введением новой ERP-системы в 2018 году все номера
заказов будут изменены и состоять из восьми цифр: к старым номерам будет в начале добавлена цифра 20 или 2.

go to top
go to top

Области применения данного вакуумного насоса

This website uses cookies. By using this website, you agree to the use of cookies as outlined in our privacy statement. Learn more

OK
X
бесплатный запрос сейчас
PC 3 / RC 6