Vacuum gauge Set DCP 3000 + MPT


VACUUBRAND20683175ca. 114 mmca. 124 mmca. 0.44 kg20683175

The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C).

For measurements from atmospheric pressure to high vacuum (5 x 10-9 mbar) the vacuum measuring device DCP 3000 with combined thermal conductivity and cold cathode measuring tube (Pirani / Penning) MPT is available. Please also note our alternative product VACUU·VIEW extended.

Performance features

  • vacuum measuring device for connecting external vacuum sensors for measurements directly on the system
  • relative pressure measurement with reference sensors (VSK 3000)
  • data logger function with up to 32000 measuring points (RS 232C)
  • wide measuring range from atmospheric pressure to high vacuum (5 x 10-9 mbar) through the combination of thermal conductivity and cold cathode measuring principles (Pirani / Penning)


go to top

Technical data

Unit Converter
Technical dataUnit Set DCP 3000 + MPT
Vacuum sensorMPT 200
Cable length of vacuum sensorm2
Upper measuring limitmbar/torr1 x 103 / 7.5 x 102
Lower measuring limitmbar/torr5 x 10-9 / 3.7 x 10-9
Measurement principleCombined thermal conductivity (Pirani) / cold cathode (Penning)
Accuracy of measurement1 x 10-8 - 2 x 10-3 mbar: +- 25%; 2 x 10-3 -10 mbar: +- 10%; 10 - 100 mbar: +- 30%; 100 - 1000 mbar:+- 50%
Ambient temperature range (operation)°C10 - 40
Ambient temperature range (storage)°C-10 - 60
Max. media temp. for continuous operation / short times°C40 / 80
Material of outer housingRobust plastic housing with good chemical resistance
Protection classIP 20
Protection class of front side (also built-in version)IP 42
Max. power for VACUU·BUS® (24V DC)4 A
Cable length of external power supplym2
InterfaceRS 232C
Dimensions (L x W x H)mm144 x 124 x 114
Items suppliedVacuum gauge with external vacuum sensor MPT, ready for operation, with wall-plug power supply and manual.
AccessoriesStainless steel tubing KF DN 25 (1000 mm: 20673337)
Vent valve VB M-B (20674217)
Vacuum sensor VSK 3000 (20640530)
Vacuum sensor VSP 3000 (20636163)
Vacuum sensor MPT 200 (20683177)

-Technical data are subject to change without notice-

Ordering data

Product nameMains voltage and frequencyPlugOrder no.
Set DCP 3000 + MPT 100-230 V~ 50-60 Hz
CEE/CH/UK/US/AUS/CN 20683175
go to top
go to top
Free inquiry
DCP 3000 with MPT