Data Act

Compliance

Data Act

In accordance with Article 3(2) of the Data Act (Regulation (EU) 2023/2854), we provide you with information in the table below regarding the product data that our connected products can generate:

VACUU·SELECT

VACUU·PURE

DCP 3000

the type, format and estimated volume of product data which the connected product is capable of generating

VACUU·SELECT:

Measurement data with time-based trends of the connected vacuum sensors (CSV format) can be generated. Identification and operating data as well as diagnostic data with events and device settings are generated in text format.

The scope of the data depends on the connected peripherals (sensors) and on the selected storage intervals.

VACUU·PURE:

Identification, measurement, and operating data, as well as diagnostic data with events relating to faults/warnings during pump operation, are generated in text format.

DCP 3000:

Measurement and operating data with time-based trends of the connected vacuum sensors are generated in CSV format.

the ability to generate data continuously and in real-time

VACUU·SELECT:

Yes

VACUU·PURE:

Yes

DCP 3000:

Yes

the ability to store data on-device or on a remote server, including, where applicable, the intended duration of retention

VACUU·SELECT:

Data are stored internally only.

Completed data records older than 30 days are automatically deleted.

VACUU·PURE:

Data are stored internally only.

The storage of diagnostic data with errors and warnings is limited to the most recent 30 events in each case.

DCP 3000:

Data are stored internally only.

A maximum of 32,000 measurement points are stored.

Data access, retrieval and, where relevant, erasure options for the data, including the technical means to perform these actions, as well as the terms of use and quality of service

VACUU·SELECT:

Stored data can be transferred to a USB flash drive.

Identification, measurement, and operating data can be transmitted in real time via an RS232 or Ethernet interface.

Loading the factory settings deletes the stored data.

VACUU·PURE:

Stored diagnostic data can be transferred via the VACUU·BUS interface.

Identification, measurement, and operating data can be transmitted in real time via the VACUU·BUS interface.
Deletion of the stored data by the user is currently not intended.

DCP 3000:

Stored measurement data can be transferred via the RS232 interface.

Measurement and operating data can be transmitted in real time via the RS232 interface.

Deletion of the stored data by the user is currently not provided for.