Vacuum gauge Set DCP 3000 + VSP 3000


VACUUBRAND20683190ca. 114 mmca. 124 mmca. 0.44 kg20683190

The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C).

The vacuum sensor VSP 3000 is based on the gas thermal conductivity (Pirani) principle for the wide measuring range from atmospheric pressure to 10-3 mbar. Thanks to its structure made of chemically resistant plastics (PBT, PUR) and ceramics, it offers significantly higher chemical resistance and robustness compared to conventional Pirani sensors with fine wire metal filaments. Please also note our alternative product VACUU·VIEW extended.

Performance features

  • vacuum measuring device for connecting external vacuum sensors for measurements directly on the system
  • flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar)
  • relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C)
  • robust plastic / ceramic vacuum sensor VSP 3000 with high chemical resistance
  • VSP 3000 with a wide measuring range from atmospheric pressure to fine vacuum (10-3 mbar) thanks to the thermal conductivity measuring principle


go to top

Technical data

Unit Converter
Technical dataUnit Set DCP 3000 + VSP 3000
Vacuum sensorVSP 3000
Cable length of vacuum sensorm2
Upper measuring limitmbar/torr1000 / 750
Lower measuring limitmbar/torr1 x 10-3 / 1 x 10-3
Measurement principleThermal conductivity (Pirani), chemically resistant plastics / ceramics
Accuracy of measurement+- 15% of indicated value in the range 0.01-5 mbar/hPa/torr
Ambient temperature range (operation)°C10 - 40
Ambient temperature range (storage)°C-10 - 60
Max. media temp. for continuous operation / short times°C40 / 80
Material of outer housingRobust plastic housing with good chemical resistance
Protection classIP 20
Protection class of front side (also built-in version)IP 42
Max. power for VACUU·BUS® (24V DC)4 A
Cable length of external power supplym2
InterfaceRS 232C
Dimensions (L x W x H)mm144 x 124 x 114
NRTL certificationCanada and the USA
Items suppliedVacuum gauge with external vacuum sensor VSP 3000, ready for operation, with wall-plug power supply and manual.
AccessoriesStainless steel tubing KF DN 16 (1000 mm: 20673336)
DAkkS calibration with first delivery (20900214)
DAkkS recalibration (20900215)
Vent valve VB M-B (20674217)
Vacuum sensor VSK 3000 (20640530)
Vacuum sensor VSP 3000 (20636163)
Vacuum sensor MPT 200 (20683177)
Rubber vacuum tubing DN 6 mm (20686000)
Rubber vacuum tubing DN 8 mm (20686001)

-Technical data are subject to change without notice-

Ordering data

Product nameMains voltage and frequencyPlugOrder no.
Set DCP 3000 + VSP 3000 100-230 V~ 50-60 Hz
CEE/CH/UK/US/AUS/CN 20683190
go to top
go to top
Free inquiry
DCP 3000 with VSP (Pirani)