Vacuum controller

Get to know our versatile vacuum controller VACUU·SELECT: It is perfect for applications that require precise vacuum control and reproducible processes. How can it best be described? Time-saving - convenient - versatile. The bottom line is that the vacuum controller provides more convenience and efficiency in the laboratory. The intuitive operation allows you to get up and running in no time.

Bestseller

VACUU·SELECT complete controller

Fully equipped two-point vacuum controller for existing vacuum sources such as single pumps or powerful vacuum networks. The controller is available in several mounting configurations, as a benchtop device, for scaffold mounting or as a built-in version for panel mounting.

BestsellerControl range
VACUU·SELECT Complete controller benchtop device1080 – 1 mbar
VACUU·SELECT Complete controller for scaffold mounting1080 – 1 mbar
VACUU·SELECT Complete controller built-in version1080 – 1 mbar

VACUU·SELECT fine vacuum control package

For vacuum requirements in the fine vacuum range down to 10-3 mbar, the packages consisting of the VACUU·SELECT vacuum controller with fine vacuum measurement and all necessary components enable convenient vacuum control.

BestsellerControl range
VACUU·SELECT + VACUU·VIEW extended, KF DN 16 1000 – 1 x 10-3 mbar
VACUU·SELECT + VACUU·VIEW extended, KF DN 25 1000 – 1 x 10-3 mbar

VARIO® chemistry pumping unit

Ready-to-use complete package consisting of VACUU·SELECT vacuum controller, sensor and speed-controlled VARIO chemistry diaphragm pump.

BestsellerUltimate vacuum / Pumping speed
PC 3001 VARIO select2.0 mbar / 2.0 m3/h
PC 3004 VARIO select 1.5 mbar / 4.6 m3/h
PC 3012 VARIO select1.5 mbar / 15.0 m3/h

Do you have any questions or would you like advice?

Free inquiry

Technical highlights

Technical highlights

Full control over your processes

Using the VACUU·SELECT controller is just like using a smartphone. The intuitive menu navigation via touch display is specifically designed for laboratory applications.
VACUU·SELECT offers predefined vacuum procedures for all common laboratory applications. For solvent evaporation, VACUU·SELECT automatically detects the boiling point and controls the vacuum process.

Of course, you can also individually configure and control applications and parameters. With the application editor you can simply create individual vacuum processes via drag and drop, then save them and then run them again and again.

NEW: VACUU·SELECT user management

The User management is a new extension for our vacuum controller VACUU·SELECT. For the first time, you can individually define access to different applications, functions and authorizations based on user groups.


More information on user management

➝ VACUU·SELECT user management

Developed for the chemistry lab

The VACUU·SELECT controller covers a wide range of applications. Chemically resistant materials and sealed display electronics protect the controller against corrosion. The touch display is designed in a way, that even when wearing thick / double safety gloves, the VACUU·SELECT still responds to your touch. The control panel can be taken off so that the pump can be placed in the base cabinet or in the fume hood, whilst you operate the controller comfortably from the lab bench.

Flexibility for your processes

VACUU·SELECT is available in various versions and fits every situation:

  • The complete controller is fully equipped for operation on existing vacuum sources.
  • The packages for fine vacuum control contain everything you need for control in the fine vacuum range down to 10-3 mbar.
  • The powerful combination of our VARIO diaphragm pumps and the VACUU·SELECT controller offer particular benefits. The vacuum is controlled on demand via the motor speed. VARIO control is precise, highly efficient and whisper quiet.
  • VACUU·SELECT is also available as a built-in version for laboratory furniture and industrial process systems.
  • Integration into networks and data management systems works via appropriate connections and modern interfaces such as Modbus TCP and USB (RS-232 optional).

Do you have any questions or would you like advice?

Free inquiry

Vacuum control

VACUU·SELECT supports two vacuum control procedures. Classic 2-point control uses a solenoid valve with the VACUU·SELECT controller. Advanced VARIO control achieves unparalleled precision with motor speed control.

Classic 2-point vacuum valve controlPinpoint VARIO control via motor speed control
Control by opening and closing a vacuum valveControl via motor speed of the pump
Pump always runs at full speed

Pump speed adjusts in realtime

➝ Drastically reduced power consumption
➝ Whisper quiet operation
➝ Decreased service demand

Vacuum is maintained between the two valve switching points within the defined hysteresis range

Pinpoint vacuum

➝ Minimizes process times, saving as much as 30% compared to other control methods

Evaporation processes:

Automatic vapor pressure detection

Evaporation processes:

Fully automatic evaporations at the touch of a button thanks to proven and reliable boiling pressure detection and continuous tracking through out the entire process duration

➝ Minimizes foaming and sample loss
➝ Makes manual adjustments and programming a thing of the past

VARIO – Fully automatic evaporation at the touch of a button

When selecting the "Automatic Evaporation" mode, the VACUU·SELECT vacuum controller in combination with our VARIO pumps finds the boiling pressure of the solvent or even several boiling points of a solvent mixture fully automatically and continuously adjusts the vacuum to the process requirements - until the end of the process.

Do you have any questions or would you like advice?

Free inquiry

Product overview

VACUU·SELECT vacuum controller without vacuum pump

VACUU·SELECT complete controllerVACUU·SELECT fine vacuum control package
VACUU·SELECT Complete controller benchtop device
1080 - 1 mbar
VACUU·SELECT + VACUU·VIEW extended, KF DN 16
1000 - 1 x 10-3 mbar
VACUU·SELECT Complete controller for scaffold mounting
1080 - 1 mbar
VACUU·SELECT + VACUU·VIEW extended, KF DN 25
1000 - 1 x 10-3 mbar
VACUU·SELECT Complete controller built-in version
1080 - 1 mbar
VACUU·SELECT + VSP 3000, KF DN 16
5 - 1 x 10-3 mbar
VACUU·SELECT + VSP 3000, KF DN 25
5 - 1 x 10-3 mbar

Diaphragm pumps with VACUU·SELECT vacuum controller

Diaphragm pumps for non-corrosive media
Variants with VARIO® control
Chemistry diaphragm pumps
Variants with two-point vacuum control
Chemistry diaphragm pumps
Variants with VARIO® control
MD 4 VARIO select
1 mbar | 5.7 m3/h
PC 510 select
7 mbar | 2.0 m3/h
PC 3016 VARIO select
70 mbar | 20.0 m3/h
MD 12 VARIO select
1.5 mbar | 16.0 m3/h
PC 511 select
7 mbar | 2.0 m3/h
ME 16C VARIO select
70 mbar | 20.0 m3/h
MV 2 VARIO select
0.3 mbar | 3.3 m3/h
PC 520 select
7 mbar | 2.0 m3/h
PC 3002 VARIO select
7 mbar | 2.8 m3/h
MV 10 VARIO select
0.3 mbar | 14.0 m3/h
PC 610 select
1.5 mbar | 3.4 m3/h
MZ 2C VARIO select
7 mbar | 2.8 m3/h
PC 611 select
1.5 mbar | 3.4 m3/h
PC 3001 VARIO select
2.0 mbar | 2.0 m3/h
PC 620 select
1.5 mbar | 3.4 m3/h
PC 3001 VARIO select TE
2.0 mbar | 2.0 m3/h
PC 3001 VARIO select EK Peltronic
2.0 mbar | 2.0 m3/h
PC 3004 VARIO select
1.5 mbar | 4.6 m3/h
MD 4C VARIO select
1.5 mbar | 4.6 m3/h
PC 3012 VARIO select
1.5 mbar | 15.0 m3/h
MD 12C VARIO select
1.5 mbar | 15.0 m3/h
PC 3003 VARIO select
0.6 mbar | 2.8 m3/h
PC 3010 VARIO select
0.6 mbar | 13.0 m3/h
MV 10C VARIO select
0.6 mbar | 13.0 m3/h

Do you have any questions or would you like advice?

Free inquiry

FAQ

How often should I adjust gauges and controllers?

Our gauges and controllers are designed for excellent long-term stability. You should perform an adjustment as required. We cannot give a general recommendation regarding the frequency. This is highly dependent on the media used in the process and the requirements for the measurement tolerances. The type of device also has an influence. Devices with capacitive sensors need to be calibrated less frequently than devices with Pirani sensors.

How often should gauges and controllers be calibrated?

There is neither a regulation nor a general recommendation in this regard. As with adjustment, the need for calibration depends on the process requirements, media used and type of device. Many customers decide on six-month or annual intervals.

Can I have my instrument calibrated at VACUUBRAND

Yes, we operate a measurement laboratory accredited by DAkkS (Deutsche Akkreditierungsstelle GmbH) as a calibration laboratory for vacuum measuring instruments. It is authorised to perform DAkkS-calibrations for vacuum measuring instruments in the range of 1300 to 10-3 mbar (abs.) and hand out DAkkS calibrating certificates.

➝ Calibration of vacuum measuring instruments in the VACUUBRAND DAkkS calibration laboratory

What connections do the devices have and what materials are they made of?

The connections differ depending on the product. The information on this is precisely documented in the technical data and the operating manual. You can find these on the respective product page on our website or via our operating manual search.

➝ Operating manual search

How can I log and transfer data?

The DCP 3000 vacuum gauge and the VACUU·SELECT vacuum controller offer the option of data logging and data transfer via RS 232 interface. VACUU·SELECT additionally offers a USB connection as well as the option of network integration and communication via Modbus TCP. For exact information on connections and interfaces, please refer to the corresponding operating manuals. You can find them on the respective product page on our website or via our operating manual search.

➝ Operating manual search

Can the old CVC 3000 controller be replaced by the new VACUU·SELECT?

In general, you can simply replace the CVC 3000 with the VACUU·SELECT controller and continue to use your existing equipment. For pumping units with built-in controller, you should contact us in advance. We will then check whether the VACUU·SELECT fits into the housing of your existing pump.

servicevacuubrand.com

Tel.: +49 9342 808-5660

Can I secure protect the controller with a password. Are there user and admin rights?

With the VACUU·SELECT user management it is possible to provide users with different rights and their own password. The user management is a paid extension.

➝ VACUU·SELECT user management

Do you have any questions or would you like advice?

Free inquiry

X
Free inquiry
Vacuum controllers

By submitting the contact form, you agree to the processing of your data for the purpose of answering your request. Further information and information on revocation and objection can be found in our privacy statement. Field marked with * are mandatory.